Open the Phone app Open the Settings Tap on Incoming call settings Enable or disable Proximity sensor Some users have reported that Xiaomi proximity sensor is not working properly. This may be due to a wrong installation or incorrect usage of the sensor, or it could also be caused by an issue with your phone’s software. In this article, we will show you how to fix Xiaomi proximity sensor issues using simple steps. Go to Settings >> About Phone >> Kernel. You need to tap on “Kernel” 4 to 5 times continuously before it gives you access to the “Hardware test” window. Find the “Proximity Sensor” and run the test to determine if the sensor is faulty or if re-calibration will do the trick.
Subscribe For Quality Tech Videos: https://goo.gl/jK2NonF O R S P O N S O R E D E N Q U I R I E SEmail: sponsor@getdroidtips.com♥️ You can get me a coffe
Go to settings options on your phone. Click on About Phone and click Kernel. The kernel will give access to the hardware test by clicking on it 4-5 times. Now run the Proximity Sensor to detect the issue. Reset to Factory Settings: Resetting the device option would better be chosen if the above workarounds don’t simplify the job. Resetting
Enabling the proximity sensor First, we go into “Calls”. In the lower-left corner, there will be “three bars”. Click on them. We are redirected to the standard page with all the items for detailed configuration. Click on the section “Incoming Now, look at the inscription “Proximity Sensor”. Is
2rFaQD.
  • w7cfz2s31w.pages.dev/267
  • w7cfz2s31w.pages.dev/246
  • w7cfz2s31w.pages.dev/340
  • w7cfz2s31w.pages.dev/120
  • w7cfz2s31w.pages.dev/516
  • w7cfz2s31w.pages.dev/162
  • w7cfz2s31w.pages.dev/137
  • w7cfz2s31w.pages.dev/68

    • setting proximity sensor xiaomi